DIN 110WCrV5, AISI Approx. O7

Short Description:

Designation by Standards Mat. No. DIN EN AISI - 110WCrV5 - Approx. O7 Chemical Composition (in weight %) C Si Mn Cr Mo Ni V W Others 1.10 0.23 0.30 1.20 - - 0.20 1.30 - Description This alloy is on of the cold work, oil hardening type tool steels. Applications Planing machine blades, tap drills, machine blades for cutting paper, paperboard and tobacco. Physical properties (avarage values) at ambient temperature Modulus of elasticity [103 x N/...

FOB Price: US $0.5 - 9,999 / Piece

Min.Order Quantity: 100 Piece/Pieces

Supply Ability: 10000 Piece/Pieces per Month

Port: Shenzhen

Payment Terms: L/C,D/A,D/P,T/T

Send email to us Download as PDF

Product Detail

FAQ

Product Tags

Designation by Standards

Mat. No.	DIN	EN	AISI
-	110WCrV5	-	Approx. O7

Chemical Composition (in weight %)

C	Si	Mn	Cr	Mo	Ni	V	W	Others
1.10	0.23	0.30	1.20	-	-	0.20	1.30	-

Description
This alloy is on of the cold work, oil hardening type tool steels.

Applications
Planing machine blades, tap drills, machine blades for cutting paper, paperboard and tobacco.

Physical properties (avarage values) at ambient temperature
Modulus of elasticity [10³ x N/mm²]: Approx. 210
Density [g/cm³]: 7.80

Coefficient of Linear Thermal Expansion 10^-6 ^oC^-1

20-100^oC	20-200^oC	20-300^oC	20-400^oC	20-500^oC
11.0	12.5	13.3	13.8	14.1

Soft Annealing
Heat to 720-750^oC, cool slowly in furnace. This will produce a maximum Brinell hardness of 230.

Stress Relieving
Stress relieving to remove machining stresses should be carried out by heating to approx. 650^oC, holding for 1-2 hours at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.

Hardening
Harden from a temperature of 780-820^oC, 800-860^oC followed by water or oil quenching. Hardness after quenching is min. 64-65 HRC.

Tempering
Tempering temperature: 150-300^oC.

Tempering Temperature (^oC) vs. Hardness (HRC)

100^oC	200^oC	300^oC	400^oC	500^oC
66	63.5	57.5	53	49

Tempering Diagram

Forging
Hot forming temperature: 1050-850^oC.

Machinability
No data.

Corrosion Resistance
Corrosion resistance of this alloy is better than that of plain carbon steels. However it will rust unless given protective treatment.

Disclaimer
The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.